Tips for choosing cordless drills

Inherently, do it yourself is an art that requires channeling inner creativity and completing basic home duties by yourself. Most home duties do not necessarily require the employment of a professional, and therefore it is important to ensure that you have essential tools that will facilitate the completion of such tasks. A cordless drill is an example of an essential tool that is utilized in DIY. In essence, a cordless drill is a machine that is used in the installation of fixtures or structures on various surfaces. Significantly, the drill is mainly used for metalworking and woodworking. Also, a drill is designed with a cutting tool that is used to bore holes on surfaces.

You are can thereby maneuver with freedom whenever you are carrying out various projects. It is very versatile as it gives you the liberty to work anywhere without any limitations based on distance or remoteness. Choosing the ideal drill can be cumbersome and therefore you ought to learn the essential factors that determine the suitability of the cordless drill. These factors are enlisted as follows;

Types of cordless drills

As a buyer, it is fundamental to be knowledgeable about the various types of drills that are present in the market today. There are four common types of cordless drills, and they include the cordless screw drivers, cordless hammer drivers, cordless drills/drivers and cordless impact drivers. Cordless screw drivers are utilized in driving screws and carrying out minor woodworking jobs. The cordless drivers are multi purpose tools employed in driving and removing screws from surfaces. Thirdly, the cordless impact drivers are tools that are utilized by technicians to fasten and remove bolts of particular surfaces. Finally, the hammer drivers are considered the most powerful drill due to their ability drive through concrete, bricks and even metals.


Power conversely determines the efficiency of a cordless drill. Therefore you must ensure that the voltage of the drill acquired is adequate for to perform the objectives for which it is needed. Normally, the voltage ranges from between 2.4V to 36 V. However it is important to point out that the voltage does not dictate the efficiency of the drill, but it does determine the adequacy. For example, a cordless drill which is powered to perform masonry projects will be too powerful for the performance of DIY home projects.